Daily Maintenance Method of Twin Screw Extruder


Release time:

2019-05-15

Daily maintenance method of twin-screw extruder: 1. after 500 hours of use, there will be iron filings or other impurities in the gear box, so the gear should be cleaned and the lubricating oil of the gear box should be replaced at the same time. 2. after a period of time to carry out a comprehensive inspection of the extruder, check the tightness of all screws. 3., if there is a sudden power failure in production, the main drive and heating stop, when the power supply is restored, the barrel must be reheated to the specified temperature and heat preservation for a period of time before the extruder can be started. If the 4. finds the steering full degree of the instrument and pointer, check whether the contact of the equilateral line of the thermocouple is

Daily maintenance method of twin screw extruder:
1. after 500 hours of use, there will be iron or other impurities in the gear box, so the gear should be cleaned and the gearbox lubricating oil should be replaced.
2. after a period of time to carry out a comprehensive inspection of the extruder, check the tightness of all screws.
3., if there is a sudden power failure in production, the main drive and heating stop, when the power supply is restored, the barrel must be reheated to the specified temperature and heat preservation for a period of time before the extruder can be started.
4., if the steering full degree of the instrument and pointer is found, check whether the contact of the equilateral line of the thermocouple is good.

Tag:

SAF Coolest v1.3.1.2 设置面板FZYSD-ZPJT-EAAAE-AZX

图片ALT信息: Qianjiang Jianghan Drilling Tools Co., Ltd.
违禁词: First, best, first-class, leading, unique, king, leader, leader, extreme,

无数据提示

Sorry, the current column is being updated, please look forward to it!

You can view other columns or returnHome Page

V1.3.1 SVG图标库请自行添加图标,用div包起来,并命名使用